Glass Dustry Aluminum Spacer Bending Machine

insulating glass production line,glass dustry Aluminum spacer bending machine ,easy and accurate

ALL THE IG PRODUCTS ARE 20% OFF ON MAY,2020

When the production is finished, use this function to close the pressing plate to prevent dust from falling into the contaminated glass, and to avoid the influence of moist air on the flatness of the pressing plate.

When the first piece of glass is adsorbed by the front press plate, use this function to take out the glass, the press plate automatically closes, releases the glass, and transmits it to the press release section.

Note: when using this function, it is necessary to ensure that there is no glass on the conveyor belt of the back pressure plate, otherwise it is easy to crush the glass. When the second piece of glass has entered the flat pressure section, it can be switched to manual mode to reverse the glass.

Application

in this screen, it is mainly used to manually adjust the distance between the front press plate and the transmission beam, and to take out the glass with the manual positive and negative conveyor belt.

Equipment details

• Adopt Siemens PLC control system
• There are 4 Siemens servo
• Adopt 12 sets of racks which could storage more different sizes of spacers. Use Siemens servo to change different racks.
• Automatically cut and feed aluminum spacers
• Bend shaped spacer frames continuously
• Automatically avoid the connecting corner while bending and cutting
• The machine grabs the spacer from the top instead of grabbing the spacer from bottom, solving the old-fashioned reversing problem.
• Using industrial computer technology which could realize the on-site drawing by workers on the industrial computer and directly bending the drawn graphics.
• The special machine hand device is used to bend big spacer frame

• USB input function, read the excel format file directly etc (Optional)

• Precise bending effect, corner error less than 0.1mm.

• Spacer printing code function (Optional)
• Connect to ERP system (Optional)
• Heavy duty connectors is convenience and safety for installation and debugging

• Spare parts of all machine have ID codes.
• Automatic drill gas filling hole (Optional)
• Printing paper label sticker function (Optional),could remove it easily.
• Can bend aluminum spacer ,Technoform, Alupro, Thermix, warm spacer (Swisspacer) and stainless steel ( Optional) and so on.
• Electrical parameters
• 

• NAME	BRAND	NAME	BRAND
  PLC	GERMAN SIEMENS	Triplet	Taiwan AIRTAC
  Low voltage electrical apparatus	GERMAN SIEMENS	Cylinder	Taiwan AIRTAC
  Servo motor	GERMAN SIEMENS	Solenoid valve	Taiwan AIRTAC
  Servo driver	GERMAN SIEMENS	Switch power	Taiwan TEND
  Relay	JAPAN OMRON	TOUCH SCREEN	Taiwan WEINVIEW
  Sensor	KOREA AUTONICS	GUIDE	Taiwan TBI

glass bending machine

industrial bending machine

Glass Dustry Aluminum Spacer Bending Machine Images